Keeping a house mould-free can be one of the challenging tasks because they can grow on many different surfaces. They are thin and black living organisms that are also known as fungi. Mildew and mould can build on the surfaces where organic matter and moisture are present.
However, triggering key mould hot spots in a house can be a tricky job, especially if you are
moving out of your rental premises. It is important to clean every nook and cranny of the premises, including the areas where the mould and mildew are lurking.
You can also take professional assistance for a thorough end of lease cleaning in Sunshine Coast. They know the areas where mould can reside and treat them using high-quality cleaning products that are environmentally safe.
If you are looking for DIY ways to remove mould and mildew from your house, then this article is for you. Below is the list of five household mould hot spots along with the cleaning hacks.
Let’s Get Started!
1. Toothbrush Holder
A ceramic or glass toothbrush holder is considered as one of the key mould hot spots in your house. Many people clean their bathroom from top to bottom but overlook that mouldy toothbrush holder.
When the water drips from the toothbrush into the holder, mould starts building up on the bottom of the container. It is important to treat it as soon as possible.
How to Clean:
In order to prevent the mould from growing, you need to rinse and dry the bottom of your toothbrush holder once or twice a week. Make sure you use soap water to get rid of mould and mildew from the caddy of your toothbrush.
2. Bathroom and Kitchen Sinks
The area beneath kitchen and bathroom sinks is prone to mould and mildew because of moist, warm and dark environment. Don’t forget to check these areas and also fix the plumbing issues such as leaking pipes and taps before the final inspection of your rental property.
How to Clean:
All you need to do is to wipe down the cabinet under the sink using bleach or
hydrogen-peroxide cleaning agent.
Leave the solution on the affected area for 15-20 minutes before wiping off with a microfiber cloth. This will remove as well as prevent the spread of mould.
If the mould still persists on the surface, then consider hiring professional end of lease cleaners in Sunshine Coast. They will come to your place fully-equipped with necessary cleaning tools and products to help you achieve clean and mould-free results.
3. Carpets and Upholstery Furniture
Believe it or not! Carpets, upholstery furniture, drapes and area rugs accumulate a ton of dust, dirt particles, dead skin and pet hairs- which can lead to mould spores. Plus, an accidental spill of coffee or wine creates a perfect environment for mould breeding. If you want to
ensure a clean and germ-free house, then you need to focus on these hotspots as well on a regular basis.
How to Clean:
Make sure you treat the affected area using a safe and sound carpet cleaning solution. First, remove the spill by blotting the area with a cloth dampened in vinegar and warm water solution. You can also sprinkle a pinch of baking soda for better results.
Apart from this, vacuum your floor coverings, furniture and drapes on a regular basis to get rid of dust, dirt and other debris. Keep these areas dust-free if you want to keep mould and mildew at bay.
4. Ceiling Tiles
Ceiling tiles are also one of the breeding grounds for nasty mould and mildew because ducts and pipes often operate through the surface above it. The area holds dust, moisture and warmth – which is an ideal environment for the mould growth. So, make sure you trigger ceiling tiles while sprucing up your home and treat mould and mildew as soon as possible.
How to Clean:
Make sure there is no leakage around the area. Use the bleach-based cleaning solution to treat mould from ceiling tiles. It is good to inspect these areas regularly to detect problems before they spread.
5. Around the Water Heaters
Do you have a water heater or a boiler at home? They come with drains to get rid of excess moisture that produces in the course of normal operation. These drains can become rusted if not cleaned on a regular basis. It also allows the mould to grow on the floors, walls and also circulate in the air.
How to Clean:
Inspect the HVAC unit drains once or twice a month and ensure they are operating fine. To remove mould, wipe off the surface using a clean cloth dampened in a mould remover agent. Leave the solution for a few minutes and scrub it off. Rinse and dry to see better results.
Conclusion
Nasty- look mouldy surfaces need to be treated as soon as you detect them. Make sure you thoroughly inspect these areas while cleaning up your property, especially rental premises and try to keep these hotspots moist-free and ventilated.
If you want best outcomes, then hire experts for meticulous
end of lease cleaning in Sunshine Coast. They can target all these hot spots and bring back the property in its pristine condition before the final inspection by your landlord.
