Easiest Way To Clean Grout Without Scrubbing

Easiest Way To Clean Grout Without Scrubbing

By : angelina
Grout is a cement-based mixture used to fill the gaps between tiles and other flooring materials. Unfortunately, it can get dirty and dull over time, making your bathroom and kitchen tiles look unsightly.

While hundreds of store-bought grout cleaners are available on the local market, you still need to scrub the surface hard to restore the white shine of your grout lines.

Dirty grout can also harbour germs, bacteria and cause mould infestation if not cleaned properly. So, whenever you spruce up your bathroom and kitchen tiles, consider the easiest ways to use natural cleaners and non-abrasive tools to clean grout without scrubbing.

Many professionals use easy yet effective hacks for quality bond cleaning in Sunshine Coast and help tenants pass the rental inspection without any conflict.

Here are some of the best tricks to help you eliminate stains and grime from grout lines without much elbow grease, but before that, let’s dig more and know why grout cleaning is important.

Key reasons Why Grout Cleaning is Imperative

1. Maintains Hygiene

Grout is porous and can accumulate grime, mould, and bacteria easily. With regular cleaning, you can prevent the spread of these substances and promote a healthy and cleaner environment – keeping health hazards at bay.

2. Enhances the Curb Appeal of Your Tiled Surface

Over time, grout can become stained, dull and discoloured due to dirt and stains. Cleaning can restore its original shine and enhance the overall look of your bathroom tiles or kitchen tiled walls.

3. Prevents Damage 

Overlooking the gap between tiles can lead to serious damage. Dirt and mould can act as abrasives and cause the grout to wear out. This can make your tiles lose or even dislodge. So, regular sprucing keeps them in tip-top condition.

4. Expand the Lifespan 

With proper cleaning and maintenance, you can extend the lifespan of your tiles. However, you should not use harsh chemicals, like ammonia, bleach, etc, to remove grime as these can cause discolouration and damage.

Super-Easy Tips to Clean Grout Without Scrubbing

1. Remove Loose Dirt and Debris

Before tackling stubborn stains, mould and grime, bond cleaners in Sunshine Coast pay attention to the loose dirt, grime and debris. So, clean the tiled surface using a clean microfiber cloth or vacuum the floor. This will make it easy to remove stubborn stains without much elbow grease.

2. Spray White Vinegar and Lemon Solution

Instead of using expensive and chemically-laden cleaners, prepare a homemade grout cleaner using vinegar and lemon. This acidic solution can break down heavy dirt, caked-on-grime and other stains. It can help you clean hard water stains, rust stains, grime and other marks without giving you a hint of stress.

Mix 2 cups of warm water with 3 tablespoons of vinegar and 2 teaspoons of lemon juice. Spray the solution over the lines and let it sit for 10 minutes.

Wipe off the surface with a damp rag. This will save you energy and help you achieve sparkling results.

3. Try Hydrogen Peroxide & Baking Soda For Stubborn Stains

Believe it or not! Hydrogen peroxide and baking soda are an ideal combination for grout cleaning. You can get rid of stubborn stains, grime and mould with ease.

Hydrogen peroxide has strong antibacterial and antiviral properties and can easily remove mould and viruses. Baking soda is also a great cleaning product that can also banish bad smells. However, it is good to know the difference between baking powder and Baking soda because both look similar but have different purposes. Use baking soda for removing stain and grime.

To prepare a grout cleaning solution:

  • Mix 1 part of 3 % hydrogen peroxide with 2 parts of baking soda in a bowl.
  • Apply the mixture to the stained lines using a toothbrush or sponge.
  • Let it sit for 20 minutes until you wipe it off using a wet cloth.
  • Rinse the surface with water, and don’t forget to dry it using a towel.
  • This can help you remove mould and caked-on grime with ease.

    4. Borax is an Effective Stain Remover

    It is a natural mineral that can help remove soap scum, hard water stains and other grime from grout lines. Make sure you mix 1 cup of borax with two cups of warm water in a spray bottle.

    Spray and let it rest for 20 minutes. Use an old toothbrush to scrub off the surface. This won’t require abrasive scrubbing because borax can dissolve tough grime in a few minutes.

    5. Use a Steam Cleaner

    This is one of the best ways to clean dirty grout without using any effort. A steam cleaner can loosen the tough grime and mould in a few minutes.

    Fill the steam cleaner with water and hot the nozzle close to the lines. Let the machine do its work. Scrub the surface with a damp cloth, rinse with plain water and dry it using a clean cloth.

    Here is a list of 10 best steam mops of 2023 that you can consider before investing in a new one.

    How to Seal the Grout ?

    Once you clean the dirty surface between your tiles, seal it to prevent heavy dirt, dust and moisture from damaging the lines. It will become water resistant and repels mould and mildew.

    Here is a quick guide to make your work easier:

  • Use a grout sealer designed specifically for the type of grout you have in your bathroom or kitchen.
  • Apply the product evenly to all the lines using a brush.
  • Let the sealer dry completely and let it penetrate into the grout, offering a protective barrier.
  • Wipe off excess sealer from the tiles using a clean cloth or sponge.
  • Once the grout is fully cured, conduct a test by sprinkling water on the lines. If the water beads up on the surface, the sealer is working properly.
  • If you are preparing the rental property, read the residential tenancy laws in Queensland and hire the best company for a thorough bond cleaning Sunshine Coast and save your hard-earned deposited security.

    Wrapping Up

    These are some of the simple yet effective methods to remove stubborn stains, dirt, caked-on grime and mould from grout lines without abrasive scrubbing. This way, you can maintain the longevity of your tiles and create a healthy environment by keeping germs and fungi at bay.