End-of-Lease Cleaning for Different Types of Flooring

End-of-Lease Cleaning for Different Types of Flooring

By : angelina
If you are doing an end-of-lease cleaning soon to get your bond back, you must ensure all areas of your home are spotless. One of the major areas you must concentrate on in your end-of-lease cleaning are your floors. It is important to clean your floors and remove dirt and dust to improve your home’s overall hygiene. A clean floor will also add a fresh look to your home and create a good impression on new tenants. Thus, you must find out the material of your floor and its finish to use the right cleaning products to maintain it. If you are short on time or have many rooms to clean, you can hire professional bond cleaning in Sunshine Coast services to deep-clean your floors and make them sparkle and shine. However, if you prefer doing this end-of-lease cleaning on your own, here are some tips to help you clean the different types of flooring in your home:

1. Marble Floors: Porous And Gets Stained Easily


Marble floors look glamorous and are most commonly found in most homes across the Sunshine Coast. But you must take extra precautions while doing an end-of-lease cleaning for your marble floors, as these floors are highly porous and can get stained easily. If you do not want your landlord to deduct your bond amount due to stained and yellow-coloured marble flooring, follow the below tips:
  • Do not vacuum your floors, as the wheels could scratch the surface.
  • Avoid using acidic cleaning solutions like vinegar, which could scratch and damage the finish.
  • Instead, bond cleaners on the Sunshine Coast recommend using ¼ cup of pH-neutral soap and mixing it with one cup of warm water.
  • Dip a clean rag in this solution and wipe each section of your marble floors from left to right.
  • Immediately dry the area with a clean cloth to avoid staining.
  • You can also use self-polish liquid wax strips to add shine to your marble floors and impress your landlords.

  • Tip Here are some pH neutral products that are safe to use on your floors.

    2. Hardwood Floors: Prone To Moisture Buildup And Streaks


    Hardwood floors are another popular choice for many homes as they look stylish and classic. You can also find different varieties and colours of hardwood floors like cherry and walnut. To clean your hardwood floors, you must also know what finishing they have used. To do this, run your finger across the floor; if there are streaks, it means there is a wax finish on it. If your hardwood floors have been sealed with a wax finish, you must avoid cleaning them with water and use only a dry dust mop to clean them. On the other hand, if your hardwood floors have a polyurethane finish, you should use mild soap and water to clean them. Lastly, ensure you rinse and dry the area immediately to avoid a buildup of mould and dampness.

    3. Asphalt: Rough And Can Get Damaged By Abrasive Soaps


    Asphalt is more durable and rough than most flooring materials, but if you use abrasive and strong soaps to clean it, the material can get etched over time. Thus, it is best to mop and clean your asphalt floors with a mild soap solution and let the air dry. Bond cleaners on the Sunshine Coast recommend that you do not oversaturate the mop as the moisture could seep into the corners of the asphalt tiles and slowly loosen them. You can also remove marks on asphalt flooring by wiping steel wool in wax, polishing the area, and then drying it with a clean cloth. Tip You can use the following tips to clean your vinyl plank flooring.

    4. Concrete Floors: Stain-Resistant And Long-Lasting


    If you have concrete floors that are properly sealed, they will be easier to clean and maintain because these floors are stain-resistant and durable. To clean sealed concrete floors, you can use a vacuum to remove dust and allergens and maintain good overall hygiene at home. Once you get rid of the loose dust, you should remove tough stains and spills by mopping your concrete floors with castile or pH-neutral soap and then letting it air dry.

    5. Ceramic Tiled Floors: Easy To Maintain And Durable


    Ceramic tiled floors are easier to maintain than most flooring materials as they are durable and can be cleaned easily. You can use a vacuum with a tile setting and remove dirt and dust from the tiles and grout. Next, dilute a mild detergent in hot water and use an old rag to clean your ceramic tiles. Bond cleaners on the Sunshine Coast recommend that you avoid using a mop as this can saturate your tiles and grout and cause staining. You can also clean the grout between the tiles by using a mixture of baking soda paste and water and scrubbing it with a toothbrush. If the grout has become discoloured, spray a few drops of hydrogen peroxide to brighten the area. Tip Here are some more benefits of cleaning with hydrogen peroxide.

    Conclusion


    The above tips will help you do a proper end-of-lease cleaning of your floors to impress your landlord and get your bond back. However, if your floors are badly stained or full of dirt marks, it is best to get professional help as these experts have advanced tools and cleaning solutions to tackle even the toughest mess.