09Dec2021
Guide To Cleaning Mould From Bathroom Ceilings
Moulds on the bathroom ceiling are a common problem that households have to deal with. If the area covered by mould is ten square feet or less than that, it is considered a minor issue, and you can easily deal with it using DIY methods.
However, if it is bigger than that, it is advisable to hire professionals who offer reliable end of lease cleaning in Sunshine Coast. They have the expertise and experience to deal with moulds.
Mould looks not only bad but also responsible for various allergies and other health issues. The toxins released by moulds can cause fatigue, nausea, headaches, lung irritation, eye irritation, etc. Therefore, you should get rid of the moulds as soon as you notice it. If you want to clean it perfectly and without any hassles, then you need to follow some specific ways.
Read on to know about how to clean mould from bathroom ceilings.
Prepare to Clean the Moulds
Before you start cleaning the moulds from bathroom ceilings, you need to prepare for the task. Wear protective gear and make sure the conditions are appropriate to start the cleaning.- Wear goggles to protect your eyes
- Wear gloves to prevent the skin irritation
- Wear a cotton face mask so that you do not inhale the mould particles
- Close the vents so the fungus cannot spread to other areas of the home
- Open the window of the bathroom
Different Ways to Clean the Moulds
To clean the mould from the bathroom ceiling, you do not require any store-bought mould remover. You can simply use natural ingredients like hydrogen peroxide, vinegar, baking soda, essential oil, lemon, etc. Clean Mould with Hydrogen Peroxide Hydrogen peroxide is an antiviral, antifungal and anti-bacterial solution found in most medicine cabinets, and it’s an effective mould treatment. You can use it safely on various surfaces such as bathroom fixtures, tubs, kitchen appliances, counters, hard flooring, and even certain wall surfaces. Mix it with water and spray on the mould. Then leave it for a few hours before scrubbing the area with a brush. Clean Mould with White Vinegar White vinegar is a mildly acidic product that cleans, disinfects and deodorises. It can also destroy around 82% of mould species, which includes black mould, on porous as well as non-porous surfaces. Spray it directly on the surface because mixing it with water will reduce its effectiveness. Apply applying the solution, leave it for a few hours and then wash it. Clean Mould with Baking Soda From absorbing the bad odour in the refrigerator to releasing heartburn, baking soda has several uses in the house – including mould removal. It’s safe for your family and pets, and it not only kills black mould but it also absorbs moisture that attracts mould. Mix it in water properly and spray the solution over the mould. Then leave it until the water dries. Finally, use a brush to remove the mould. Clean Mould with Essential Oil Essential oils have made aromatherapy a popular word, but this natural ingredient can do so much more. Many people are not aware of the fact that tea tree oil is an antiseptic, insect repellent and deodoriser. So, it is one of the best methods for removing mould. All you need to do is to mix essential oil of your preferred flavour in water and spray it over the mould. Leave it for a few hours until the moisture dries. Clean Mould with Lemon Lemons are natural deodorisers, antiseptic, stain remover, and cleaner — and they can also remove mould. The high concentration of acid in lemons breaks down mould, making it a lot easier to remove the fungus and leaves behind a disinfected surface. On top of that, you also get an excellent citrus fragrance.When You Should Hire Professionals
If the size of the mould is more than ten square feet, then you should hire professional who offer thorough end of lease cleaning in Sunshine Coast. They use modern tools and advanced methods to remove mould in an effective manner. However, you need to make sure that you choose a genuine company. So take your time and properly evaluate a bond cleaning company before choosing it.Preventive Measures
Removing the mould is not the solution because they can keep coming back. So, you need to identify the factors that promote their growth. You can take the following preventive measures to keep the fungus at bay.- Fix the water leaks: If water pipes run through the ceiling, you need to check if there is any leakage problem. Then you will have to repair it.
- Improve the ventilation in the bathroom: the presence of excess moisture in the bathroom is also responsible for their growth. To try to keep it dry by improving the ventilation. Open windows and doors for better air circulation. If you do not have a window in the bathroom, opt for an exhaust fan.
- You should also keep your bathroom spick and span so mould does not get a chance to grow.
